Inexpensive all-round mat with non-slip profile. Generally sufficient grip along the mat, good grip across the mat. Gluing of the covering is recommended. For mats with inlay, loose laying is possible to a limited extent in individual cases.
Surface:
Top side finely longitudinally grooved, underside fabric-patterned. The quality NR/SBR (black, without inlay) is available in thickness 3mm in widths 1m and 1.2m and in thickness 4mm in width 1.2m also with a smooth underside.
Area of application:
As anti-slip, sound and impact protection on a wide variety of walking and storage surfaces.
Standard fine groove mat material:
NR/SBR rubber, ca. 65+/-5°ShoreA,
the oil-resistant quality is made of NBR/SBR rubber, ca. 65+/-5°ShoreA (Art. 440.7109 + 440.7129)
Tolerances
acc. to DIN 7715 Part 5 P3
»» Datasheet tolerances
| Article |
Thickness | Width | Length | Color | Inlay | Features | |||
| 440.5106 | 3 mm | 1,0 m | 10 m | grey | |||||
| 440.5109 | 3 mm | 1,0 m | 10 m | black | |||||
| 440.5126 | 3 mm | 1,2 m | 10 m | grey | |||||
| 440.5129 | 3 mm | 1,2 m | 10 m | black | |||||
| 440.5149 | 3 mm | 1,4 m | 10 m | black | |||||
| 440.6109 | 3 mm | 1,0 m | 10 m | black | 1 inlay | ||||
| 440.6129 | 3 mm | 1,2 m | 10 m | black | 1 inlay | ||||
| 440.7109 | 3 mm | 1,0 m | 10 m | black | oil resistant |
The profiles shown here are technical qualities. All information is intended only as an initial assessment of the materials. These are in no way binding technical values or usage recommendations. We strongly recommend conducting your own tests to verify the suitability of the selected materials for the intended application!
The information listed above is not subject to updates!
For more details, please refer to the technical datasheets.