High-density polyurethane foam, density 0.35g/m³
Surface
Mixed-cell structure, cut from blocks into sheets
Area of application
For sealing, springing and insulating even under high mechanical loads. Excellent resilience, high impact elasticity and very good abrasion resistance, even under very high and permanent mechanical stress and compression.
For operating temperatures from -30°C to +80°C.
Good resistance to mineral oils and greases, good ozone and UV resistance. Not or only conditionally resistant to gasoline.
Not resistant to acids and alkalis.
Material
mixed-cell polyurethane foam (cellular vulkolan), color “ bright”, density 0.35g/cm³
Tolerances
acc. to DIN 7715 Part 5 P3
»» Datasheet tolerances
| Article |
Thickness | Width | Length | Color | ShoreA | Insert | Features |
| 569.0002 | 2 mm | 0,25 m | 0,5 m | bright | 0,35 g/cm³ | - | mechanically highly resilient |
| 569.0003 | 3 mm | 0,25 m | 0,5 m | bright | 0,35 g/cm³ | - | mechanically highly resilient |
| 569.0004 | 4 mm | 0,25 m | 0,5 m | bright | 0,35 g/cm³ | - | mechanically highly resilient |
| 569.0005 | 5 mm | 0,25 m | 0,5 m | bright | 0,35 g/cm³ | - | mechanically highly resilient |
| 569.0006 | 6 mm | 0,25 m | 0,5 m | bright | 0,35 g/cm³ | - | mechanically highly resilient |
| 569.0008 | 8 mm | 0,25 m | 0,5 m | bright | 0,35 g/cm³ | - | mechanically highly resilient |
| 569.0010 | 10 mm | 0,25 m | 0,5 m | bright | 0,35 g/cm³ | - | mechanically highly resilient |
The profiles shown here are technical qualities. All information is intended only as an initial assessment of the materials. These are in no way binding technical values or usage recommendations. We strongly recommend conducting your own tests to verify the suitability of the selected materials for the intended application!
The information listed above is not subject to updates!
For more details, please refer to the technical datasheets.