Highly elastic para sealing sheet for general technical use, low Shore hardness version
Surface
Smooth and talcum-coated on both sides
Area of application
Semi-finished product, e.g. for the production of interior seals. Quality with very good mechanical properties. Highly elastic, with very good rebound and recovery values, tensile strength, abrasion resistance and notch resistance. Resistant to many diluted acids and alkalis.
Not resistant to weathering and ageing, not UV-resistant and ozone-resistant, not suitable for use with oils and greases.
Material
NR 40+/-5°ShoreA, gray, without insert
Other thicknesses and widths on request.
Tolerances
acc. to DIN 7715 Part 5 P3
»» Datasheet tolerances
| Article |
Thickness | Width | Length | Color | ShoreA | Insert | Features |
| 260.4001 | 1 mm | 1,4 m | 20 m | gray | 40+/ |
- | highly elastic |
| 260.4002 | 2 mm | 1,4 m | 20 m | gray | 40+/ |
- | highly elastic |
| 260.4003 | 3 mm | 1,4 m | 10 m | gray | 40+/ |
- | highly elastic |
| 260.4004 | 4 mm | 1,4 m | 10 m | gray | 40+/ |
- | highly elastic |
| 260.4005 | 5 mm | 1,4 m | 10 m | gray | 40+/ |
- | highly elastic |
| 260.4006 | 6 mm | 1,4 m | 10 m | gray | 40+/ |
- | highly elastic |
| 260.4008 | 8 mm | 1,4 m | 5 m | gray | 40+/ |
- | highly elastic |
| 260.4010 | 10 mm | 1,4 m | 5 m | gray | 40+/ |
- | highly elastic |
The profiles shown here are technical qualities. All information is intended only as an initial assessment of the materials. These are in no way binding technical values or usage recommendations. We strongly recommend conducting your own tests to verify the suitability of the selected materials for the intended application!
The information listed above is not subject to updates!
For more details, please refer to the technical datasheets.