Cellular rubber
back to Cellular rubber
Cellular rubber plates EP570

Closed-cell EPDM cellular rubber sheets, non-adhesive.

Material
closed-cell EPDM cellular rubber, color black, density 0.145 +/-0.05g/cm³

Surface
small-cell structure without outer skin, cut from blocks into panels, untrimmed with fabrication edges

Features
Can be used in a variety of ways for permanent installation, for sealing, springing and insulating against draughts, moisture, heat, cold, noise, etc.
Good resilience, decreases significantly with increasing load intensity and frequency. Very good resistance to weathering, ageing and numerous chemicals, resistant to various diluted acids and weak alkalis.
Not or moderately resistant to oils and greases.

Tolerances
acc. to DIN 7715 Part 5 P3, Shrinkage value untempered 5-8%
»» Datasheet tolerances

* rechter Bereich der Tabelle ist scrollbar
Article-No. Thickness Width Length Color Density
570.9022 2 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9032 3 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9042 4 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9052 5 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9062 6 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9082 8 mm 1 m 2 m black 0,145+/-0,05g/cm³
* rechter Bereich der Tabelle ist scrollbar
Article-No. Thickness Width Length Color Density
570.9102 10 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9122 12 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9152 15 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9202 20 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9252 25 mm 1 m 2 m black 0,145+/-0,05g/cm³
570.9302 30 mm 1 m 2 m black 0,145+/-0,05g/cm³

The profiles shown here are technical qualities. All information is intended only as an initial assessment of the materials. These are in no way binding technical values or usage recommendations. We strongly recommend conducting your own tests to verify the suitability of the selected materials for the intended application!

The information listed above is not subject to updates!
For more details, please refer to the technical datasheets.