Cellular rubber sheets EP570 self-adhesive: GummiBusch

Cellular rubber sheets EP570 self-adhesive
closed-cell EPDM cellular rubber, density 0.145+/-0.05g/cm³,
self-adhesive on one side as an mounting aid

Color
black

Surface
Small-cell structure without outer skin, blocks glued to length and cut into sheets, partially untrimmed, with self-adhesive coating and cover film on one side

Features
Can be used in a variety of ways for permanent installation, for sealing, springing and insulating against draughts, moisture, heat, cold, noise, etc. Good resilience, decreases significantly with increasing load intensity and frequency. Very good resistance to weathering, ageing and numerous chemicals, resistant to various diluted acids and weak alkalis. Not or moderately resistant to oils and greases

Tolerances
acc. to DIN 7715 Part 5 P3
»» Datasheet tolerances

* rechter Bereich der Tabelle ist scrollbar

Article-No.	Thickness	Width	Length	Color	Density	Insert	Features
570.0001	1 mm	0,98 m	10 m	black	0,145+/-0,05g/cm³	-	self-adhesive on one side
570.0002	2 mm	0,98 m	10 m	black	0,145+/-0,05g/cm³	-	self-adhesive on one side
570.0003	3 mm	0,98 m	10 m	black	0,145+/-0,05g/cm³	-	self-adhesive on one side
570.0004	4 mm	0,98 m	10 m	black	0,145+/-0,05g/cm³	-	self-adhesive on one side
570.0005	5 mm	0,98 m	10 m	black	0,145+/-0,05g/cm³	-	self-adhesive on one side
570.0006	6 mm	0,98 m	10 m	black	0,145+/-0,05g/cm³	-	self-adhesive on one side
570.0008	8 mm	0,98 m	5 m	black	0,145+/-0,05g/cm³	-	self-adhesive on one side
570.0010	10 mm	0,98 m	5 m	black	0,145+/-0,0g/cm³	-	self-adhesive on one side

The profiles shown here are technical qualities. All information is intended only as an initial assessment of the materials. These are in no way binding technical values or usage recommendations. We strongly recommend conducting your own tests to verify the suitability of the selected materials for the intended application!

The information listed above is not subject to updates!
For more details, please refer to the technical datasheets.