Open cell, very light and adaptable EPDM-foam rubber strips, self-adhesive
Material
open cell EPDM-foam rubber, color black, density 0,09 +/-0,02g/cm³,
self-adhesive on one side as a mounting aid.
Surface
large-, open-cell structure without outer skin, cut from blocks into strips, with self-adhesive coating and cover film on one side
Features
Can be used in a variety of ways for permanent installation, for sealing, damping and insulating, e.g. against draughts, moisture, heat, cold and noise. Very light, flexible and adaptable, highly compressible with good resilience, decreasing with increasing load intensity and frequency. Good resistance to ozone and numerous other media, resistant to various diluted acids and weak alkalis. Not or moderately resistant to oils and greases.
Self-extinguishing acc. to FMVSS 302
Tolerances
acc. to DIN 7715 Part 5 P3
»» Datasheet Tolerances
| Article |
Packaging | Number of rolls | Height | Width |
| 577.1015 | Carton á 200 m | 20 rolls á 10 m | 10 mm | 15 mm |
| 577.1020 | Carton á 150 m | 15 rolls á 10 m | 10 mm | 20 mm |
| 577.1030 | Carton á 100 m | 10 rolls á 10 m | 10 mm | 30 mm |
| 577.1040 | Carton á 70 m | 7 rolls á 10 m | 10 mm | 40 mm |
| 577.1050 | Carton á 60 m | 6 rolls á 10 m | 10 mm | 50 mm |
| 577.2020 | Carton á 160 m | 16 rolls á 10 m | 20 mm | 20 mm |
| 577.2030 | Carton á 100 m | 10 rolls á 10 m | 20 mm | 30 mm |
| 577.2040 | Carton á 70 m | 7 rolls á 10 m | 20 mm | 40 mm |
| 577.2050 | Carton á 60 m | 6 rolls á 10 m | 20 mm | 50 mm |
| 577.3020 | Carton á 150 m | 15 rolls á 10 m | 30 mm | 20 mm |
| 577.3030 | Carton á 100 m | 10 rolls á 10 m | 30 mm | 30 mm |
| 577.3040 | Carton á 70 m | 7 rolls á 10 m | 30 mm | 40 mm |
| 577.3050 | Carton á 60 m | 6 rolls á 10 m | 30 mm | 50 mm |
| 577.4030 | Carton á 20 m | 10 lengths á 2 m | 40 mm | 30 mm |
| 577.4040 | Carton á 14 m | 7 lengths á 2 m | 40 mm | 40 mm |
| 577.4050 | Carton á 12 m | 6 lengths á 2 m | 40 mm | 50 mm |
The profiles shown here are technical qualities. All information is intended only as an initial assessment of the materials. These are in no way binding technical values or usage recommendations. We strongly recommend conducting your own tests to verify the suitability of the selected materials for the intended application!
The information listed above is not subject to updates!
For more details, please refer to the technical datasheets.