Partly open-cell, partly closed-cell EPDM sponge rubber plates
Material
partly open-cell, partly closed-cell EPDM sponge rubber, color black, density 0.6+/-0.06g/cm³
Surface
vulcanized sponge rubber sheets, top and bottom side with fabric-structured and talcum-coated fabrication skin and untrimmed fabrication edges
Area of application
For sealing, damping, insulating; against draughts, moisture, dust and many media; indoors and outdoors. Very good resilience, elastic. Very good resistance to weathering and ageing, resistant to UV and ozone, resistant to many diluted acids and weak alkalis. Not or moderately resistant to oils and greases. Temperature resistant from -35°C to +120°C
Toleranzen
up to 10mm Thickness acc. to DIN ISO 3302-2 M3 C, over 10mm Thickness +/-10%
»» Datasheet tolerances
| Article |
Thickness | Width | Length | Color | |
| 580.9022 | 2 mm | 1 m | 2 m | black | |
| 580.9032 | 3 mm | 1 m | 2 m | black | |
| 580.9042 | 4 mm | 1 m | 2 m | black | |
| 580.9052 | 5 mm | 1 m | 2 m | black | |
| 580.9062 | 6 mm | 1 m | 2 m | black | |
| 580.9082 | 8 mm | 1 m | 2 m | black |
| Article |
Thickness | Width | Length | Color | |
| 580.9102 | 10 mm | 1 m | 2 m | black | |
| 580.9122 | 12 mm | 1 m | 2 m | black | |
| 580.9152 | 15 mm | 1 m | 2 m | black | sell out! |
| 580.9202 | 20 mm | 1 m | 2 m | black | sell out! |
| 580.9252 | 25 mm | 1 m | 1 m | black | sell out! |
The profiles shown here are technical qualities. All information is intended only as an initial assessment of the materials. These are in no way binding technical values or usage recommendations. We strongly recommend conducting your own tests to verify the suitability of the selected materials for the intended application!
The information listed above is not subject to updates!
For more details, please refer to the technical datasheets.