Tolerances
This list provides a quick overview of the general tolerances, unless deviating tolerances are specified in the drawings or article texts.
Error excepted!
Tolerances acc. to DIN ISO 3302-1 E2
Cross section rubber and silicone profiles
| nominal dimension in mm up to and including : | 2,5 | 4,0 | 6,3 | 10,0 | 16,0 | 25,0 | 40,0 | 63,0 | 100,0 |
| permissible deviation in mm: | +/-0,35 | +/-0,40 | +/-0,50 | +/-0,70 | +/-0,80 | +/-1,00 | +/-1,30 | +/-1,60 | +/-2,00 |
Tolerances acc. to DIN ISO 3302-1 E3
Cross section rubber and silicone profiles
| nominal dimension in mm up to and including: | 2,5 | 4,0 | 6,3 | 10,0 | 16,0 | 25,0 | 40,0 | 63,0 | 100,0 |
| permissible deviation in mm: | +/-0,50 | +/-0,70 | +/-0,80 | +/-1,00 | +/-1,30 | +/-1,60 | +/-2,00 | +/-2,50 | +/-3,20 |
Tolerances acc. to DIN ISO 3302-1 L3
Fixed lengths rubber and silicone profiles
| nominal dimension in mm up to and including: | 40,0 | 63,0 | 100,0 | 160,0 | 250,0 | 400,0 | 630,0 | 1.000,0 | 1.600,0 | 2.500,0 | 4.000,0 |
| permissible deviation in mm: | +/-1,60 | +/-2,00 | +/-2,50 | +/-3,20 | +/-4,00 | +/-5,00 | +/-6,30 | +/-10,00 | +/-12,50 | +/-16,00 | +/-20,00 |
Tolerances acc. to DIN ISO 3302-2 M3 C
Thickness sponge rubber sheet
| nominal dimension in mm up to and including: | 6,3 | 10,0 | 15,0 | 25,0 | 40,0 | 63,0 | 100,0 | 160,0 |
| permissible deviation in mm: | +/-0,40 | +/-0,50 | +/-0,60 | +/-0,80 | +/-1,00 | +/-1,30 | +/-1,60 | +/-2,00 |
Tolerances acc. to DIN ISO 3302-1 M4
Thickness PUR plates
| nominal dimension in mm up to and including: | 6,3mm | 10,0mm | 16,0mm | 25,0mm | 40,0mm | 63,0mm | |
| permissible deviation in mm: | ± 0,5mm | ± 0,7mm | ± 0,8mm | ± 1,0mm | ± 1,3mm | ± 1,6mm |
Tolerances acc. to DIN 7715 Part 5 P2
Thickness rubber sheets
| nominal dimension in mm up to and including: | 1,6mm | 4,0mm | 6,3mm | 10,0mm | 25,0mm | 40,0mm | 63,0mm | |
| permissible deviation in mm: | ± 0,2mm | ± 0,3mm | ± 0,4mm | ± 0,5mm | ± 0,6mm | ± 0,8mm | ± 1,0mm |
Tolerances acc. to DIN 7715 Part 5 P3
Dimensions strips, blanks, punched parts
| nominal dimension in mm up to and including: | 4,0 | 6,3 | 10,0 | 25,0 | 40,0 | 63,0 | 100,0 | 160,0 | 250,0 | 400,0 | über 400,0 | |
| permissible deviation in mm: | +/-0,40 | +/-0,50 | +/-0,60 | +/-0,80 | +/-1,00 | +/-1,50 | +/-2,00 | +/-2,50 | +/-3,00 | +/-5,00 | +/- 1,5% |
Tolerances acc. to DIN 7715 grob
Thickness cellular plates
| nominal dimension in mm up to and including: | 3,0mm | 6,0mm | 10,0mm | 18,0mm | 30,0mm | 50,0mm | |
| permissible deviation in mm: | ± 0,4mm | ± 0,5mm | ± 0,6mm | ± 0,8mm | ± 1,0mm | ± 1,5mm |
Tolerances acc. to DIN ISO 3302 ST 2
Thickness silicone plates
| nominal dimension in mm up to and including: | 1,0mm | 1,6mm | 2,5mm | 4,0mm | 6,3mm | 10,0mm | 16,0mm | over 16,0mm | |
| permissible deviation in mm: | ± 0,2mm | ± 0,25mm | ± 0,35mm | ± 0,4mm | ± 0,5mm | ± 0,7mm | ± 0,8mm | 5% |
Tolerances acc. to DIN 16941 3A and 3B
Cross section PVC profiles
| nominal dimension in mm up to and including: | 3,0 | 6,0 | 10,0 | 18,0 | 30,0 | 50,0 | 80,0 | 120,0 | 180,0 | |
| permissible deviation in mm: | +/-0,40 | +/-0,60 | +/-0,70 | +/-0,80 | +/-1,00 | +/-1,20 | +/-1,50 | +/-1,90 | +/-2,30 |
Tolerances acc. to DIN 16941 2A and 2B
Cross section PVC profiles
| nominal dimension in mm up to and including: | 3,0 | 6,0 | 10,0 | 18,0 | 30,0 | 50,0 | 80,0 | 120,0 | 180,0 | |
| permissible deviation in mm: | +/-0,30 | +/-0,40 | +/-0,50 | +/-0,60 | +/-0,70 | +/-0,80 | +/-1,00 | +/-1,20 | +/-1,40 |